Performance characteristics of high hardness wear-resistant liner

Tough materials such as stainless steel, prove the superiority of bimetals, the wear resistance of the wear layer is moderate wear and the substrate medium load, resulting in good impact resistance.

2022-09-08

The use and processing method of wear-resistant liner

Wear-resistant lining plate refers to various wear-resistant lining plates processed by wear-resistant steel plates through cutting, coil deformation, punching and welding,

2022-09-06

How should we deal with the corrosion of high lead tin bronze bushings

Destructive damage caused by chemical or electrochemical reactions in metals subjected to environmental influences. It can be said that almost all metal products,

2022-09-02

Experience in Casting and Processing Copper Sleeves

For example, in sand casting, when closing the box, the core should be straightened, so as to avoid the cast product caused by the incorrect core.

2022-08-31

Properties of Tin Bronze

Bronze containing 3% to 14% tin, in addition, phosphorus, zinc, lead and other elements are often added. It is the earliest alloy used by human beings and has a history of about 4,000 years.

2022-08-29

Four advantages of surfacing wear plate

Extraordinary wear resistance: The wear resistance of the surfacing wear plate is 10-30 times higher than that of ordinary steel plates, 5 times higher than that of cast stainless steel and high manganese steel,

2022-08-25

What are the characteristics of transverse cracks in wear-resistant alloy plates

Wear-resistant alloy plates generally need to be hardened for wear resistance, and martensitic structures must be obtained on the surface and core.

2022-08-23

Wear-resistant bushings for foundry crushers

An accessory in the crusher is called a wear-resistant bushing, which is easily worn due to various collisions during use. Once the bushing is damaged to a certain extent, the cost per ton of the crusher will be greatly increased.

2022-08-19

What is the fit between the bushing and the fixing seat of the oil-free bushing

In the moving parts, the parts are worn due to long-term friction, and the parts must be replaced when the gap between the shaft and the hole is worn to a certain extent.

2022-08-17

The specific principle of cone crusher

Cone crushers are widely used in mining crushing, metallurgy, chemical industry, construction, construction waste recycling, sand and gravel production, cement and other industries.

2022-08-15