How to extend the service life of wear parts

One is to choose the right material. Different materials have different degrees of wear on the vertical grinding rollers, grinding discs and lining plates. The materials have many impurities and high hardness, which have a great impact on the wear of wear-resistant parts. For example, when the content of quartz and pyrite increases, the wear-resistant spare parts will be damaged. Wear will also increase significantly, so choosing the right material is also necessary.
The second is to ensure uniform feeding. According to the hardness of the raw material, the particle size is appropriately selected. Usually, the diameter of the harder material is less than 3 cm.

Third, it is strictly forbidden to put metal blocks into the vertical mill. If necessary, an iron remover can be installed before the raw materials are fed into the mill to prevent metal substances from falling into the vertical mill and damaging the relevant spare parts.
Fourth, replace the wearing parts in time. During maintenance, the movable casing can be opened, and the vulnerable parts can be replaced in time; the main shaft must be turned before starting the machine to check whether there is any abnormal sound in the machine. If any problem is found, it should be dealt with in time, and the equipment cannot be run with disease.