The manufacturer of High Chrome White Cast Iron Damp Covers tells you that there will be a layer of paint on the surface of the centrifugal casting, which is for the state of work. And how many people know about the operation process of centrifugal casting coating? The following is the basic content related to it.

When casting a workpiece, it is necessary to bake the mold first to remove the water vapor and prevent it by the mold temperature. The manufacturer of High Chrome White Cast Iron Damp Covers tells you that baking can be done with a blowtorch or a red iron block, and this is also done for the drying of the paint.
The next steps to be operated are to clean the mold, push the asbestos pad, install and lock the front cover, and put the spout and so on. The manufacturer of High Chrome White Cast Iron Damp Covers tells you to use a paint tube to pour the paint into the mold, and pour it after the paint dries into a shell, but it should be noted that the paint tube is easy to collide with the front end cover and cause accidents. Therefore, start the machine while using the paint pipe to ensure safety.
The manufacturer of High Chrome White Cast Iron Damp Covers tells you that after the pouring is completed, it can be properly cooled in order to refine the grain structure, but pay attention to the control of temperature and time to avoid affecting the thickness of the coating.